Aaspa Equipment Private Limited

• Pressure cleaning system
• Easy operation
• Air cooled diesel engine

The tank is fabricated by a 5mm MS sheet and is coated with 40 mm glass wool. This is done to prevent heat loss. The outer covering is galvanized. Galvanized tank is better as it has long life due to its anti-corrosion properties Tank heating is the first stage. The heating pipeline of diameter e inches and the second stage is 6 inches. Manhole for maintenance or to all bitumen tank is if 500mm X 600mm. A manual Temperature gauge is provided for temperature display up to 300 Degrees Celsius.

Single stage air cooled diesel engineer of 6.5 HP at 1500 RPM, Engine powers bitumen pump and air compressor. Fuel consumption is 0.7-1 Liters per hour.

The bitumen decanter from AASPA is a high efficiency, reliable and productive decanting unit custom designed to deliver the best in class productivity & reliable performance. These decanters are specially designed to reheat and melt bitumen packed in drums.

Designed for use in association with bulk storage tanks the melted bitumen is automatically transferred from the decanter reservoir to the storage tank during the decanting process.

These units are designed to seamlessly integrate to existing installations such as an asphalt plant or bitumen binder production plants. Bitumen logistic is sometimes an issue, especially in those areas where an adequate supply of hot liquid product through conventional road transport tanks is not ensured.

Here most end users are consequently supplied with solid bitumen in drums, but then they have to melt bitumen back into liquid form prior to usage or storage it.

For Today Requirements, we have developed the most performing drums melting unit actually available on the market. Reliability, user-friendly and high efficiency are the key features of these machines, widely sold to all major road contractors,most of which owning more than one unit for each of their different job sites.

• Most economical way Melting Bitumen in Drums means minimum fuel cost & labour cost per ton of melt Bitumen
• Pollution free technology
• User Friendly equipment - no skilled operator required

Consisting of –

1.  Powered by kirloskar make 4R 105 BHP 2200RPM Diesel Engine.(URO-III)

2.  Mounted on1220- Pneumatic tires – 2 nos at rear and 2 nos (22*12*16) Solid tyres at front.

3.  Paving width minimum 2.5 miter and maximum 4.5 meter.

4.  Laying capacity up to 200mm. thickness.

5.  Hopper 5 mm thickness and 4.0 cub. capacity.

6.  WEW /KRISTO make 92 flats conveyor chain with covered by H.R .belt

7.  HYD. Power staring with tandem pump.

8.  All roller chains – diamond / roll-on./other

9.  51 teeth fiber plate heavy loaded clutch assay- 3 set.

10.  It will be equipped by hydraulically telescopic screed .

11.  vibrating and heating system without sensor unit.

12.  12 Volt Exide make power battery.

13.  Tool box with tools and accessories.

Backed by years of industry experience, we are engaged in offering a premium quality range of Bitumen Sprayer.

Features:

• Easy maintenance
• Sturdy design
• Excellent operational fluency

• Pressure cleaning system
• Easy operation
• Air cooled diesel engine

The tank is fabricated by a 5mm MS sheet and is coated with 40 mm glass wool. This is done to prevent heat loss. The outer covering is galvanized. Galvanized tank is better as it has long life due to its anti-corrosion properties Tank heating is the first stage. The heating pipeline of diameter e inches and the second stage is 6 inches. Manhole for maintenance or to all bitumen tank is if 500mm X 600mm. A manual Temperature gauge is provided for temperature display up to 300 Degrees Celsius.

Single stage air cooled diesel engineer of 6.5 HP at 1500 RPM, Engine powers bitumen pump and air compressor. Fuel consumption is 0.7-1 Liters per hour.

Backed by years of industry experience, we are engaged in offering a premium quality range of Bitumen Sprayer.

Features:

• Easy maintenance
• Sturdy design
• Excellent operational fluency

The tank is fabricated by a 5mm MS sheet and is coated with 40 mm glass wool. This is done to prevent heat loss. The outer covering is galvanized. Galvanized tank is better as it has long life due to its anti-corrosion properties Tank heating is the first stage. The heating pipeline of diameter e inches and the second stage is 6 inches. Manhole for maintenance or to all bitumen tank is if 500mm X 600mm. A manual Temperature gauge is provided for temperature display up to 300 Degrees Celsius.

Single stage air cooled diesel engineer of 6.5 HP at 1500 RPM, Engine powers bitumen pump and air compressor. Fuel consumption is 0.7-1 Liters per hour.

Aaspa Equipment Pvt. Ltd. offers a state-of-the-art Kerb Laying Machine, designed to deliver superior performance, precision, and efficiency in road construction projects. This robust and highly reliable machine is engineered for the rapid and accurate laying of concrete kerbs, channels, and edge lines with minimal manual intervention.

Key Features:
✅ High Productivity: Capable of laying kerbs at a consistent speed with excellent finish quality.
✅ Precision Engineering: Ensures uniformity and accuracy in kerb dimensions.
✅ Adjustable Moulds: Compatible with a variety of moulds for different kerb profiles and sizes.
✅ Powerful Engine: Equipped with a fuel-efficient diesel engine for reliable operation in tough site conditions.
✅ User-Friendly Controls: Simple hydraulic and mechanical systems for ease of operation and maintenance.
✅ Robust Build: Heavy-duty steel construction for durability and long service life.
✅ Mobility: Compact and easy to transport between job sites.

Applications:

• Road and highway construction

• Parking lot kerb installation

• Pavement and footpath edging

• Landscaping and urban development projects

Aaspa’s Kerb Laying Machine combines advanced technology with rugged design, making it the perfect solution for contractors seeking quality, speed, and cost-efficiency in kerb installation.

✅ Write a more detailed technical description (with specs like engine power, capacity, dimensions, weight, output speed, etc.)?
✅ Or a short and crisp marketing description for a website homepage?
✅ Or both (long for catalog, short for website)?

1. Bitumen Sprayer – Reliable & Efficient Road Construction Solution

   Aaspa Equipment Pvt Ltd offers high-quality Bitumen Sprayers, designed for precise and uniform spraying of hot bitumen on roads. Our sprayers are built with advanced technology, ensuring efficient operation, minimal wastage, and superior road surface quality.

   Product Features:
   ✅ Uniform Spraying – Ensures consistent bitumen application
   ✅ High-Performance Burner & Pump – Efficient heating and spraying
   ✅ Robust Construction – Durable tank and chassis for long-term use
   ✅ Easy Operation – User-friendly control system for smooth handling
   ✅ Custom Capacities Available – Suitable for different project needs

   Perfect for road contractors and construction firms, our Bitumen Sprayers deliver high efficiency, reliability, and cost-effectiveness in road construction projects.

   📞 Contact us today for the best prices!

An AASPA Bitumen Pressure Distributor is a specialized piece of equipment used in road construction and maintenance, primarily for the uniform spraying of bitumen (asphalt) onto road surfaces. The equipment ensures a consistent and controlled application of bitumen, which is crucial for creating a strong adhesive layer for the asphalt mixture, promoting durability, and preventing issues like cracking or moisture damage on road surfaces.

1. Bitumen Tank:

   • The AASPA Bitumen Pressure Distributor is equipped with a large insulated bitumen tank. The tank is designed to hold a substantial amount of bitumen, which can be heated to the required application temperature (typically around 150°C to 180°C).
   • The tank often has an internal heating system, such as electrical or diesel heating, to maintain the bitumen at the correct temperature for proper flow and spraying.

2. Pressure System:

   • The bitumen is sprayed under controlled pressure through a pump system. The pressure ensures that the bitumen is distributed evenly across the road surface.
   • A positive pressure system ensures that the bitumen reaches the nozzle uniformly, even at high speeds.

3. Spray Bar with Nozzles:

   • The machine includes a spray bar equipped with multiple nozzles, which can be adjusted to control the width of the spray pattern. This allows for a precise and uniform distribution of bitumen across the road.
   • The nozzles are designed to spray the bitumen in a fan-shaped pattern, ensuring consistent coverage without over-spraying or under-spraying.

4. Application Rate Control:

   • The bitumen distributor typically features a flow meter or application rate control system that allows operators to adjust the amount of bitumen being sprayed per unit area (typically measured in liters per square meter). This feature ensures that the correct amount of bitumen is applied to meet project specifications.
   • Modern machines might include automated control systems that adjust the spray rate according to the machine’s speed or based on GPS data, enhancing precision.

5. Adjustable Spray Width:

   • The spray width can be adjusted, allowing the distributor to handle different road widths. Some models also feature telescopic or extendable spray bars, which can be adjusted according to the required coverage.

6. Heating System:

   • The heating system ensures that the bitumen is kept at the ideal viscosity for spraying. This is critical, as bitumen that is too thick or too thin will not spray evenly or adhere properly to the surface.
   • The distributor’s heating system ensures quick and efficient heating of the bitumen, minimizing downtime during roadwork operations.

Aaspa Equipment Pvt. Ltd. manufactures high-performance Road Sweeper Machines designed for efficient cleaning of roads, highways, parking lots, and industrial areas. Built with robust engineering and advanced sweeping technology, our machines ensure superior dust and debris removal, even in challenging environments.

Key Features:
✅ Powerful Cleaning Performance: Equipped with heavy-duty brushes and high suction capacity for thorough sweeping.
✅ Dust Control System: Integrated water spray system to minimize airborne dust during operation.
✅ High Maneuverability: Compact design with excellent turning radius for easy operation in tight spaces.
✅ Engine Options: Available with tractor-mounted, truck-mounted, or self-propelled variants to suit diverse requirements.
✅ Durable Construction: Built with high-grade materials for long service life and low maintenance.
✅ User-Friendly Operation: Simple hydraulic or mechanical controls for hassle-free use.

Applications:

• Municipal and highway road cleaning

• Airport runways and taxiways

• Industrial zones and warehouses

• Large-scale parking areas and housing colonies

Aaspa’s Road Sweeper Machines are the ideal choice for municipalities, contractors, and facility managers seeking reliable and cost-effective road cleaning solutions.

✅ Add technical specifications (like sweeping width, brush diameter, tank capacity, engine power, etc.) for a detailed catalog version?
✅ Or make a shorter and punchier version for the website homepage?
✅ Or prepare both (long + short)?

The AASPA Asphalt Paver is a high-performance machine designed for paving and finishing asphalt on roads, highways, and other large surfaces. Known for its advanced technology, durability, and efficiency, the AASPA asphalt paver offers several advantages that make it a preferred choice for construction companies and municipalities. Below are the key advantages of the AASPA Asphalt Paver:

• Smooth and Even Finish: The AASPA asphalt paver ensures a consistent and smooth surface finish, which is crucial for the longevity and durability of paved roads. Its sophisticated screed technology and leveling system ensure an even distribution of asphalt, preventing defects such as bumps, ruts, or uneven surfaces.
• Automatic Control Systems: Advanced sensors and control systems allow for precise control of the paving thickness, material flow, and compaction, ensuring the highest quality output in every pass.

• High Paving Capacity: The AASPA asphalt paver is designed to handle high volumes of asphalt in a short amount of time. This allows for faster completion of large-scale projects like highways, airport runways, and urban roads, reducing overall project time.
• Efficient Material Utilization: The machine optimizes the usage of asphalt material, minimizing waste and ensuring that the required quantity is delivered in the most efficient manner.

• Heavy-Duty Construction: Built with high-quality materials and a sturdy frame, AASPA asphalt pavers are designed to endure harsh working conditions such as extreme weather, heavy traffic, and rough surfaces. They are highly reliable even under demanding conditions, ensuring long-lasting performance.
• Wear-Resistant Parts: The screed, augers, and conveyors are made from wear-resistant materials, ensuring that they last longer and require less frequent maintenance or part replacements.

• Easy Operation and Less maintenance.
• Designed for the International Market.
• Modern Drum Mix Technology.
• Proper Asphalt Coating and saving.
• Proper Drying and Homogeneous Mixing of Aggregate.
• Less Fuel Consumption.
• Continuous Electronic Belt weighing system with Load cell.
• SCADA / PLC based control panel with online print out facility.
• Schneider make HMI with touch screen.

• Easy Operation and Less maintenance.
• Designed for the International Market.
• Modern Drum Mix Technology.
• Proper Asphalt Coating and saving.
• Proper Drying and Homogeneous Mixing of Aggregate.
• Less Fuel Consumption.
• Continuous Electronic Belt weighing system with Load cell.
• SCADA / PLC based control panel with online print out facility.
• Schneider make HMI with touch screen.

Aaspa Equipment Pvt Ltd offers high-quality Bitumen Sprayers, designed for precise and uniform spraying of hot bitumen on roads. Our sprayers are built with advanced technology, ensuring efficient operation, minimal wastage, and superior road surface quality.

Product Features:
✅ Uniform Spraying – Ensures consistent bitumen application
✅ High-Performance Burner & Pump – Efficient heating and spraying
✅ Robust Construction – Durable tank and chassis for long-term use
✅ Easy Operation – User-friendly control system for smooth handling
✅ Custom Capacities Available – Suitable for different project needs

Perfect for road contractors and construction firms, our Bitumen Sprayers deliver high efficiency, reliability, and cost-effectiveness in road construction projects.

�� Contact us today for the best prices!

Bitumen sprayers ensure that the bitumen is spread evenly across the surface. This uniform application is crucial for the proper bonding of the asphalt and ensures that the final surface is smooth and consistent. Uneven application can lead to poor road quality and premature damage.

Bitumen sprayers are designed for high-speed operation, which makes them much faster than manual bitumen application. This speeds up the overall construction process, reducing the time it takes to complete roadworks, especially on large projects.

Modern bitumen sprayers come with controls that allow the operator to adjust the flow rate, spray width, and pressure. This precision ensures that the right amount of bitumen is applied, reducing waste and ensuring an optimal amount of binder for asphalt.

While bitumen sprayers involve an upfront investment, they lead to cost savings in the long term. They help reduce labor costs, ensure the efficient use of bitumen (reducing waste), and lower the need for rework due to uneven application or surface defects.

When bitumen is evenly applied using a sprayer, the resulting asphalt layer has a strong bond, which increases the longevity of the road. This makes the road more durable against traffic wear, weather, and environmental factors.

A properly applied bitumen coat ensures that the surface dressing or asphalt mix adheres properly to the road base, reducing the likelihood of cracking, potholes, or other issues that could affect the road quality in the future.

Bitumen sprayers can handle a variety of tasks in asphalt roadwork, including surface dressing, patching, and even spraying for crack sealing. This makes the equipment versatile for use in both new construction and maintenance of existing roads.

By precisely controlling the amount of bitumen applied, bitumen sprayers reduce waste, leading to less environmental impact. Additionally, newer sprayers are often designed to be more energy-efficient and may use eco-friendly bitumen alternatives.

Manual bitumen application can expose workers to the risks of handling hot materials. Bitumen sprayers minimize this risk by automating the process, allowing operators to work from a safe distance, reducing the potential for burns or accidents.

Because bitumen sprayers allow for quicker application, roadworks can be completed faster, which helps minimize road closures and traffic disruptions. This is especially beneficial in busy urban areas or high-traffic roads.

Many modern bitumen sprayers are designed to be user-friendly, with simple controls and easy maintenance. This helps reduce the complexity of the equipment and ensures reliable operation, even for non-experienced operators.

Bitumen sprayers are compatible with different types of bitumen, such as hot bitumen, cold emulsions, and other binders used in road construction. This makes them adaptable to various weather conditions and road requirements.

Before asphalt laying, the application of bitumen using a sprayer serves as an essential bonding agent between the existing surface and the new asphalt layer. This ensures a longer-lasting and stronger bond between layers, preventing premature damage.

The AASPA Automatic Line Marking Machine is designed to provide efficient and precise marking for various surfaces, commonly used in roadways, parking lots, sports fields, and industrial areas. Here's a detailed description of its features and capabilities:

1. Automatic Operation: The machine operates automatically, making line marking faster and more consistent compared to manual methods. It is designed to reduce human error and ensure accurate, even lines.

2. Versatility: Suitable for use on various surfaces such as asphalt, concrete, and turf. This versatility makes it ideal for different applications, including traffic lane markings, parking spaces, and field sports lines.

3. Adjustable Line Width: The AASPA Automatic Line Marking Machine can adjust the width of the lines according to the user’s requirements. This is especially useful for tasks like road lane marking or creating smaller or wider lines on sports fields.

4. High Precision: It ensures high-precision marking, which is crucial for safety and clarity in road markings, as well as for professional-level sports field markings.

5. Spray System: Typically, the machine uses a spray system with paint or thermoplastic materials. The application system is designed for uniform and efficient coverage, minimizing paint waste and reducing the need for multiple passes.

6. Ergonomics and User-Friendliness: The design of the machine allows for easy operation. It is often equipped with a user-friendly interface, and the controls are designed to be intuitive, even for users with minimal experience.

7. Durability: Built with high-quality materials, the machine is designed to withstand harsh weather conditions and heavy-duty use, making it reliable over time.

8. Speed and Efficiency: With its automatic operation, the AASPA line marking machine significantly increases productivity. It can cover large areas in a short amount of time, ideal for commercial and municipal use.

9. Eco-Friendly: Some models are designed to use eco-friendly paints and materials, reducing the environmental impact of line marking.

10. Maintenance and Durability: The machine is designed for ease of maintenance. Components like the spray nozzles, motors, and tires can be serviced or replaced without hassle.

• Road and Highway Markings: For creating lane markings, pedestrian crossings, and road signs.
• Sports Fields: Marking lines for football, soccer, basketball courts, and other sports.
• Parking Lot Line Marking: To create parking space lines, directional arrows, and other markers.
• Industrial and Warehouse Use: Marking safety lanes, loading docks, and walkways.

• Consistency: Automatic marking ensures uniformity and neatness across large areas.
• Cost-Effective: Saves on labor costs and material waste due to efficient paint application.
• Time-Saving: The automatic system reduces the time required to mark large areas compared to manual methods.

In summary, the AASPA Automatic Line Marking Machine is a reliable and efficient solution for anyone needing high-quality and precise line marking, whether for roads, sports fields, parking lots, or industrial facilities.

The AASPA Bitumen Modified Plant is an advanced system used for producing modified bitumen, which is typically used in road construction and other applications where enhanced performance characteristics are required. The plant is designed to efficiently mix and modify bitumen with various additives, such as polymers, crumb rubber, or other materials, to improve its properties.

• Improved Durability: Modified bitumen produced in these plants offers superior resistance to aging, cracking, and rutting. This leads to longer-lasting road surfaces and infrastructure.
• Better Temperature Sensitivity: The plant produces bitumen with improved resistance to both high and low temperatures. This is particularly beneficial in regions with extreme weather conditions, as it helps prevent the bitumen from becoming too soft in hot temperatures or too brittle in cold temperatures.
• Increased Elasticity: Bitumen modified with polymers or other additives tends to have better elasticity, reducing the likelihood of cracks forming due to traffic loads and environmental stress.

• Variety of Additives: The AASPA bitumen modified plant is capable of processing different types of modifiers such as polymers, rubber (crumb rubber), or other specialized additives, allowing for the production of a range of customized bitumen products.
• Tailored Product Characteristics: By adjusting the type and amount of additives, the plant allows manufacturers to produce bitumen with specific characteristics required for various applications, from road construction to roofing or waterproofing.
• Adaptability to Different Standards: The plant can be adapted to meet local or international specifications for modified bitumen, ensuring that the product produced is compliant with regulatory standards.

• Advanced Mixing Technology: The plant uses high-efficiency mixing and heating systems that ensure uniform distribution of additives throughout the bitumen. This results in higher-quality end products and reduces inconsistencies.
• Continuous Production: Many AASPA plants are designed for continuous processing, which helps increase productivity and ensures a constant supply of modified bitumen without significant downtime.
• Energy Efficiency: Modern bitumen modified plants, including those from AASPA, are designed to be energy-efficient, using less fuel or electricity for heating and mixing processes, which helps reduce operating costs.

The AASPA Bitumen Modified Plant is an advanced system used for producing modified bitumen, which is typically used in road construction and other applications where enhanced performance characteristics are required. The plant is designed to efficiently mix and modify bitumen with various additives, such as polymers, crumb rubber, or other materials, to improve its properties.

• Improved Durability: Modified bitumen produced in these plants offers superior resistance to aging, cracking, and rutting. This leads to longer-lasting road surfaces and infrastructure.
• Better Temperature Sensitivity: The plant produces bitumen with improved resistance to both high and low temperatures. This is particularly beneficial in regions with extreme weather conditions, as it helps prevent the bitumen from becoming too soft in hot temperatures or too brittle in cold temperatures.
• Increased Elasticity: Bitumen modified with polymers or other additives tends to have better elasticity, reducing the likelihood of cracks forming due to traffic loads and environmental stress.

• Variety of Additives: The AASPA bitumen modified plant is capable of processing different types of modifiers such as polymers, rubber (crumb rubber), or other specialized additives, allowing for the production of a range of customized bitumen products.
• Tailored Product Characteristics: By adjusting the type and amount of additives, the plant allows manufacturers to produce bitumen with specific characteristics required for various applications, from road construction to roofing or waterproofing.
• Adaptability to Different Standards: The plant can be adapted to meet local or international specifications for modified bitumen, ensuring that the product produced is compliant with regulatory standards.

• Advanced Mixing Technology: The plant uses high-efficiency mixing and heating systems that ensure uniform distribution of additives throughout the bitumen. This results in higher-quality end products and reduces inconsistencies.
• Continuous Production: Many AASPA plants are designed for continuous processing, which helps increase productivity and ensures a constant supply of modified bitumen without significant downtime.
• Energy Efficiency: Modern bitumen modified plants, including those from AASPA, are designed to be energy-efficient, using less fuel or electricity for heating and mixing processes, which helps reduce operating costs.

Bitumen sprayers are essential machines in road construction and maintenance, specifically used for the application of bitumen (also known as asphalt) on road surfaces. These machines offer several advantages, making them highly efficient for roadwork. Here’s a breakdown of the key benefits:

1. Uniform Application: Bitumen sprayers ensure that the bitumen is applied evenly over the surface, which is crucial for the durability and longevity of the road. This uniformity prevents wear patterns that could lead to potholes and damage.

2. Time Efficiency: Bitumen sprayers are designed for high-speed application, which speeds up the road construction process. This allows construction teams to cover larger areas in less time, which is especially beneficial in large-scale road projects.

3. Cost-Effective: While the initial investment in a bitumen sprayer can be significant, it ultimately reduces labor costs, as the machine replaces manual labor, and it also minimizes material wastage by ensuring a controlled and even spread of bitumen.

4. Versatility: These machines can be used in various roadworks, including surface dressing, patching, and maintenance tasks. They can handle different types of bitumen, like hot bitumen or emulsions, allowing for flexibility depending on the project’s needs.

5. Improved Safety: By automating the bitumen application process, the machine reduces the risks associated with manual spraying, such as burns or exposure to hazardous materials. The sprayer also allows operators to work from a safe distance from the hot material.

6. Precision Control: Many modern bitumen sprayers come with advanced features like flow control, which allows operators to adjust the amount of bitumen being sprayed based on the specific needs of the project. This precision reduces the likelihood of over-application or under-application, both of which can be costly.

7. Reduced Material Wastage: Since bitumen is applied in controlled amounts, the amount of waste is minimized. This makes bitumen sprayers an eco-friendly choice, helping reduce the environmental impact of road construction.

8. Improved Surface Bonding: Proper application of bitumen is essential for achieving a strong bond between the layers of asphalt, ensuring smooth driving surfaces. Bitumen sprayers help achieve this bond by applying the bitumen in a consistent, even layer.

9. Increased Durability: Roads treated with bitumen using a sprayer are often more durable and resistant to wear and weather conditions, leading to longer-lasting infrastructure.

10. Flexibility for Different Roadworks: Bitumen sprayers are used not only in new road construction but also in the maintenance and rehabilitation of existing roads, such as surface dressing and crack sealing.

1. Bitumen Sprayer – Reliable & Efficient Road Construction Solution

   Aaspa Equipment Pvt Ltd offers high-quality Bitumen Sprayers, designed for precise and uniform spraying of hot bitumen on roads. Our sprayers are built with advanced technology, ensuring efficient operation, minimal wastage, and superior road surface quality.

   Product Features:
    Uniform Spraying – Ensures consistent bitumen application
   High-Performance Burner & Pump – Efficient heating and spraying Robust Construction – Durable tank and chassis for long-term useEasy Operation – User-friendly control system for smooth handling Custom Capacities Available – Suitable for different project needs

   Perfect for road contractors and construction firms, our Bitumen Sprayers deliver high efficiency, reliability, and cost-effectiveness in road construction projects.

   �� Contact us today for the best prices!
2.